Key takeaways
- Treating tearing as a dying card. It is a synchronization issue and does not mean hardware damage.
- Treating artifacts as a game bug. If they appear on the desktop, the game is not the cause.
- Running an overclock while troubleshooting. Reset to default first so the test is clean.
- Adjusting many settings at once. Change one thing at a time to see what helped.
- Using adaptive sync with the wrong cable or port. Some inputs do not support it.
Screen tearing and GPU artifacts are two different problems, and the fastest way to sort them out is to look at what the glitch does. A horizontal line that splits the image during motion is tearing, a sync issue fixed with variable refresh rate or V-Sync. Random colored dots, flashing blocks, stripes or shapes that stay on screen regardless of motion are artifacts, which point to drivers, overheating, an unstable overclock or failing hardware.
Tell Them Apart First
| What you see | Most likely type | First thing to try |
|---|---|---|
| Horizontal split in the picture during fast panning | Screen tearing | Enable G-Sync, FreeSync or V-Sync |
| Tear line that moves up and down | Screen tearing | Cap frame rate below refresh rate with adaptive sync on |
| Colored dots, sparkles, or snow | Artifacts | Lower clocks, check cable and temperatures |
| Checkerboard or striped patterns, even on the desktop | Artifacts | Clean driver install, reseat card, test another cable |
| Flashing or stretched textures in one game only | Software or game issue | Update driver and game, run the game launcher file scan |
| Black screen followed by glitches | Driver crash or power issue | Check power cables and the driver |
A useful test is to see whether the glitch appears on the Windows desktop or in the BIOS screen. If it does, the problem is almost never the game, and the graphics card, cable or monitor is more likely. If it only appears in motion in games, tearing is more likely.
Fixing Screen Tearing
Tearing happens when the GPU sends a new frame while the monitor is partway through drawing the previous one. The monitor then shows pieces of two frames at once. It is not a hardware fault.
Turn on variable refresh rate
Adaptive sync, sold as G-Sync, G-Sync Compatible or FreeSync, makes the monitor follow the GPU’s frame rate. Enable it in the monitor’s on-screen menu and in the graphics driver control panel. Both settings usually have to be on, and the display must be connected through a supported port such as DisplayPort or an HDMI 2.1 input.
Use V-Sync as a fallback
V-Sync limits the GPU to the monitor’s refresh rate so frames line up. It removes tearing but can add input delay, which matters in competitive games. Many players pair adaptive sync with V-Sync on in the driver and a frame rate cap just below the maximum refresh rate, an approach commonly described by reviewers.
Check the refresh rate setting
Windows sometimes leaves a high-refresh monitor at 60 Hz. Open the advanced display settings and choose the monitor’s top refresh rate. A mismatch can cause tearing that looks like a defect.
Review overlays and windowed modes
Borderless windowed games sometimes ignore driver-level sync settings. Try exclusive fullscreen, or enable the optimizations for windowed games in the graphics settings if your driver offers it.
Fixing GPU Artifacts
Artifacts are corrupted image data. They can stem from software or hardware, so work from the least disruptive step to the most.
- Power down and reseat cables. Turn off and unplug the PC before touching any cable inside the case. Check the video cable at both ends and try a different cable or port. A damaged cable can create sparkles that look like card failure.
- Test on another display. If the artifacts follow the card, the monitor is ruled out. If they stay on the monitor, the cable or screen is the cause.
- Remove overclocks. Reset the graphics card and memory to default in the tuning tool, and disable any BIOS memory profile changes related to the card. An unstable overclock is a common cause of artifacts, and overclocking can void a warranty and cause instability.
- Do a clean driver install. Use the maker’s driver installer with the clean installation option, or the vendor’s display driver uninstall method, then reinstall the current driver.
- Check temperatures. Use a monitoring tool to watch the GPU and memory temperatures. Excess dust, a failed fan or poor case airflow can push the card past safe limits, which causes visual glitches and crashes. Clean the heatsink with the PC powered off and unplugged.
- Check the power connections. Make sure the power cables to the card are fully seated. For cards that use the 12VHPWR or 12V-2×6 connector, follow the card maker’s and power supply maker’s guidance, and stop using the card if you see heat damage on the connector. Never open a power supply.
- Test in another PC. If artifacts remain with a known-good power supply and a clean driver install, the card itself may be failing, and a repair or warranty claim with the maker or retailer is the next step.
Cause and Fix Quick Reference
| Cause | Typical sign | Fix |
|---|---|---|
| Frame and refresh mismatch | Tear line in motion | Adaptive sync, V-Sync, frame cap |
| Wrong refresh rate in Windows | Tearing at 60 Hz on a faster screen | Select the top refresh rate |
| Bad or low-grade cable | Sparkles, flicker, dropouts | Replace with a certified cable |
| Unstable overclock | Artifacts under load | Return clocks to default |
| Overheating | Artifacts after heat builds up | Clean dust, fix fans and airflow |
| Corrupt driver | Glitches in many apps | Clean driver reinstall |
| Failing video memory or card | Persistent artifacts on the desktop | Test in another system, contact the maker |
Common Mistakes
- Treating tearing as a dying card. It is a synchronization issue and does not mean hardware damage.
- Treating artifacts as a game bug. If they appear on the desktop, the game is not the cause.
- Running an overclock while troubleshooting. Reset to default first so the test is clean.
- Adjusting many settings at once. Change one thing at a time to see what helped.
- Using adaptive sync with the wrong cable or port. Some inputs do not support it.
When to Contact the Maker or a Technician
If artifacts persist after a clean driver install, default clocks, a different cable and a second display, the card is the likely fault. Contact the graphics card maker or the seller about warranty options. If you smell burning or see melted plastic on a power connector, shut the system off and have a technician inspect it.
Frequently Asked Questions
Is screen tearing the same as GPU artifacts?
No. Tearing is a timing mismatch between the frames and the monitor’s refresh, and it appears as a horizontal split while the picture moves. Artifacts are corrupted pixels or patterns caused by drivers, heat, overclocking or hardware faults.
Can a bad cable cause artifacts?
Yes. A damaged or low-quality cable can cause sparkles, flicker or signal dropouts that look like card failure. Trying a different certified cable is a cheap and quick test.
Does V-Sync fix screen tearing?
It does by holding frames to the refresh rate, but it can add input lag. Adaptive sync generally gives smoother results with less delay when your monitor supports it.
Can overheating cause artifacts?
It can. When the GPU or its memory runs too hot, visual glitches and crashes may follow. Cleaning dust and checking fans and airflow are standard steps.
Will reinstalling the driver fix artifacts?
Sometimes, if the cause is a corrupt driver. If artifacts show on the desktop or in the BIOS screen, a driver reinstall is unlikely to help, and hardware, cable or monitor is more likely.
FAQ
Is screen tearing the same as GPU artifacts?
Can a bad cable cause artifacts?
Does V-Sync fix screen tearing?
Can overheating cause artifacts?
Will reinstalling the driver fix artifacts?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.