Updated Nov 18, 2026· 6 min read

Key takeaways

  • Running from a non-admin window. The scan will refuse to start.
  • Skipping DISM. A scan that says it cannot fix files often succeeds after the component store is repaired.
  • Closing the window at a low percentage. Progress may look stuck, particularly at the start. Wait for the result line.
  • Expecting it to repair drivers or games. SFC covers protected Windows files only.
  • Ignoring hardware. Repeated corruption can point to failing storage or unstable memory, which a file scan cannot cure. Check drive health and run a memory test if the same errors keep returning.
  • Running it during heavy use. The scan reads a lot of files. Close games and launchers so the work finishes cleanly.

To run SFC, open Command Prompt or Windows Terminal as administrator, type sfc /scannow, press Enter, and leave the window open until the scan reaches 100 percent and prints a result message. If you want the best odds of a clean repair, Microsoft’s own support guidance says to run the DISM repair command first and SFC second.

The Short Version

  1. Click Start, type cmd or Terminal, right-click the result, and choose Run as administrator.
  2. Optional but advised by Microsoft: type DISM.exe /Online /Cleanup-image /Restorehealth and press Enter. Wait for it to finish.
  3. Type sfc /scannow and press Enter.
  4. Wait for the verification to hit 100 percent. Do not close the window.
  5. Read the message, restart the PC, and run the scan again if repairs were made.

What SFC Actually Does

System File Checker is a built-in Windows tool. Microsoft describes it as scanning protected system files and replacing corrupted ones with a cached copy. It checks Windows components only. It does not scan your game folders, your drivers from the GPU maker, or your personal files, so it will not fix a broken game install or a bad overclock.

For gamers and PC builders, the tool is most useful when Windows itself misbehaves: Settings crashing, the Start menu failing to open, odd blue screens that point to system files, or Windows Update failing with file-related errors. If only one game crashes, a game file check in the launcher is usually the better first move.

Step-by-Step in Detail

1. Open an elevated prompt

SFC needs administrator rights. If you run it from a normal prompt, it stops with a message saying you must be an administrator. On Windows 11 the quickest route is to right-click the Start button and pick Terminal (Admin), then accept the User Account Control prompt. On Windows 10, search for Command Prompt and choose Run as administrator.

2. Run DISM first

SFC pulls replacement files from a local component store. If that store is itself damaged, SFC cannot fix anything. Microsoft’s guidance says DISM supplies the files needed to repair the corrupted ones, and that it should run before SFC. The command is DISM.exe /Online /Cleanup-image /Restorehealth. It needs access to Windows Update or a local source, so connect to the internet first. The progress bar can appear to sit at a certain percentage for a long time; that is normal for this tool, so be patient rather than closing it.

3. Start the scan

Type sfc /scannow. The prompt shows “Beginning system scan. This process will take some time.” and then a percentage. Duration varies with the drive type and the PC, and a SATA hard drive will take noticeably longer than an NVMe SSD. Closing the window mid-scan can leave the job incomplete, so wait for the result line.

4. Restart and re-run if needed

If SFC reports repairs, restart Windows. Then run the scan again until it reports no integrity violations. Some repairs only finish at the next boot.

Reading the Result Messages

Message (summarized) What it means Next step
No integrity violations found Protected system files look healthy Look elsewhere: drivers, RAM, storage health, the game itself
Found corrupt files and repaired them Repair succeeded Restart, then run the scan once more
Found corrupt files but could not fix some Some files need manual attention Run DISM, retry, read the log, consider Safe Mode
Could not perform the requested operation Scan could not run normally Boot into Safe Mode and retry; make sure the temp folders exist

The Microsoft support page lists these four outcomes along with the suggested follow-ups for each.

Reading the Log File

SFC writes its details to the CBS log, located at %windir%\Logs\CBS\CBS.log. That file is large and noisy. Microsoft documents a command that extracts only the SFC entries into a readable text file on your desktop:

findstr /c:”[SR]” %windir%\Logs\CBS\CBS.log >”%userprofile%\Desktop\sfcdetails.txt”

Open the resulting text file and look at the newest timestamps. Lines mentioning a file name tell you which component SFC could not repair. If you need to ask for help on a forum, this extract is far easier to share than the full log.

Useful Variations

Command Purpose Changes files?
sfc /scannow Scan and repair protected files Yes
sfc /verifyonly Scan and report, no repair No
sfc /scanfile=path Check and repair one named file Yes
DISM /Online /Cleanup-Image /CheckHealth Quick check for flagged corruption No
DISM /Online /Cleanup-Image /ScanHealth Deeper scan of the component store No
DISM /Online /Cleanup-Image /RestoreHealth Repair the component store Yes

Running SFC When Windows Will Not Start Normally

If the desktop will not load, you can boot into the Windows Recovery Environment and open Command Prompt from the Troubleshoot menu. Offline scanning uses extra parameters that point to the Windows folder and the boot directory, and drive letters inside recovery often differ from what you see in Windows. Because the exact letters vary, check them with a directory listing before running anything, and follow Microsoft’s offline SFC instructions rather than guessing. If the PC will not reach recovery at all, a Windows installation USB made on another machine can provide the same environment.

Common Mistakes

  • Running from a non-admin window. The scan will refuse to start.
  • Skipping DISM. A scan that says it cannot fix files often succeeds after the component store is repaired.
  • Closing the window at a low percentage. Progress may look stuck, particularly at the start. Wait for the result line.
  • Expecting it to repair drivers or games. SFC covers protected Windows files only.
  • Ignoring hardware. Repeated corruption can point to failing storage or unstable memory, which a file scan cannot cure. Check drive health and run a memory test if the same errors keep returning.
  • Running it during heavy use. The scan reads a lot of files. Close games and launchers so the work finishes cleanly.

When SFC Is Not the Right Tool

Symptom Better first step
One game crashes on launch Use the launcher’s file integrity check, update the GPU driver
Random restarts under load Check temperatures, power supply, and memory stability
Windows Update keeps failing Run DISM then SFC, then use the Windows Update troubleshooter
Settings or Start menu broken DISM then SFC, then consider an in-place repair install
Blue screens with a driver name Reinstall or roll back that driver

If SFC and DISM both fail repeatedly, Windows offers repair options such as an in-place repair install or the Reset this PC feature. Back up your files first, because a reset can remove installed programs and, depending on the option chosen, personal data.

Frequently Asked Questions

Is it safe to run sfc /scannow?

Yes, it is a Microsoft tool built into Windows and it only touches protected system files. It replaces files with cached copies from the component store. It is still sensible to keep your important data backed up before any system repair.

How long does the scan take?

It depends on the drive and the system, so no fixed time applies. A fast NVMe drive usually finishes sooner than a mechanical hard drive. Leave the window open until it prints a result, even if the percentage seems to pause.

Should I run DISM or SFC first?

Microsoft’s guidance says to run the DISM Restorehealth command first, then SFC. DISM repairs the source that SFC uses for replacements. Running them in that order gives SFC a healthy store to copy from.

What if SFC says it found corrupt files but could not fix them?

Run DISM Restorehealth, restart, and scan again. If it still fails, extract the SFC lines from the CBS log with the findstr command to see which files are affected. Persistent failures may call for Safe Mode, an in-place repair install, or a reset.

Does SFC fix gaming performance problems?

Only when the cause is damaged Windows system files. Low frame rates are far more often tied to drivers, settings, thermals, or hardware limits. Treat SFC as one troubleshooting step, not a performance tweak.

Can I run SFC on Windows 10 and Windows 11?

Yes, the command works the same way on both. The only difference is how you open the elevated prompt, since Windows 11 favors Terminal while Windows 10 still offers Command Prompt in the Start search.

J
Jack Morgan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Is it safe to run sfc /scannow?
Yes, it is a Microsoft tool built into Windows and it only touches protected system files. It replaces files with cached copies from the component store. It is still sensible to keep your important data backed up before any system repair.
How long does the scan take?
It depends on the drive and the system, so no fixed time applies. A fast NVMe drive usually finishes sooner than a mechanical hard drive. Leave the window open until it prints a result, even if the percentage seems to pause.
Should I run DISM or SFC first?
Microsoft’s guidance says to run the DISM Restorehealth command first, then SFC. DISM repairs the source that SFC uses for replacements. Running them in that order gives SFC a healthy store to copy from.
What if SFC says it found corrupt files but could not fix them?
Run DISM Restorehealth, restart, and scan again. If it still fails, extract the SFC lines from the CBS log with the findstr command to see which files are affected. Persistent failures may call for Safe Mode, an in-place repair install, or a reset.
Does SFC fix gaming performance problems?
Only when the cause is damaged Windows system files. Low frame rates are far more often tied to drivers, settings, thermals, or hardware limits. Treat SFC as one troubleshooting step, not a performance tweak.
Can I run SFC on Windows 10 and Windows 11?
Yes, the command works the same way on both. The only difference is how you open the elevated prompt, since Windows 11 favors Terminal while Windows 10 still offers Command Prompt in the Start search.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.