Our Top Picks
Monitor color depth is the number of bits used to describe each color channel, and the quick version is that 8-bit (about 16.7 million colors) is fine for nearly all gaming, while 10-bit matters mainly for HDR, color work and smooth gradients without banding.
What Color Depth Means
Every pixel mixes red, green and blue. Color depth, also called bit depth, says how many brightness steps each of those three channels can take. With 8 bits per channel there are 256 steps per channel, which multiplies out to roughly 16.7 million combinations; this is often labelled 24-bit true color in general references and is described there as the modern standard for virtually all displays. With 10 bits per channel there are 1,024 steps each, giving more than a billion combinations, labelled 30-bit deep color.

Samsung 55” Commercial UHD Signage, 28.5mm Depth, Dynamic Crystal Color, Quantum Processor Lite 4K, Ultra Slim Depth, Home UI, Centered VESA Holes, 3-Year Warranty, LH55QBCEBGCXGO
Chosen because it specifies 28.5mm Depth and Dynamic Crystal Color.
View on Amazon
FEELWORLD FVM215 1000 Nits 21.5-inch Broadcast Monitor with Waveform, 3D LUT, 8-bit Color Depth, 4K60Hz HDMI & 3G-SDI Input/Output
Chosen because it specifies 3D LUT and 8-bit Color Depth.
View on Amazon
Samsung QMC LFD Display, QM43C, 28.5 mm Depth, Dynamic Crystal Color, Quantum Processor Lite 4K, SmartView+, Smart Calibration, LH43QMCEBGCXGO, 2025
Chosen because it specifies QM43C and 28.5 mm Depth.
View on AmazonIt is important not to confuse depth with gamut. Depth is precision: how finely the display can step between two shades. Gamut is range: how saturated the most extreme red, green and blue can be. A monitor can have a wide gamut and only 8-bit precision, or a narrow gamut and 10-bit precision.
Quick Reference
| Term | Bits per channel | Approx. colors | Where you see it |
|---|---|---|---|
| 6-bit (older or low-cost LCD, usually with FRC) | 6 | 262 thousand native | Older budget panels, simulated up with dithering |
| 8-bit | 8 | 16.7 million | Standard SDR gaming monitors |
| 8-bit + FRC (often written 10-bit) | 8 native, 10 simulated | Over 1 billion simulated | Many HDR-labelled gaming monitors |
| True 10-bit | 10 | 1.07 billion | Higher-end color and HDR monitors |
What FRC and Dithering Do
A lot of monitors advertise 10-bit when the panel itself is 8-bit. They use frame rate control (FRC), which flips a pixel rapidly between two neighbouring shades so your eye averages them into an in-between shade. General references note that many affordable LCDs use lower-bit panels with dithering or FRC to simulate fuller color. The VESA DisplayHDR criteria reflect this: all tiers require a 10-bit video signal input, but the minimum listed panel driver is 8-bit plus 2-bit dithering. So an 8-bit+FRC monitor can legitimately carry an HDR certification.
In practice, good FRC is hard to tell apart from true 10-bit for gaming. Reviewers who check gradients generally report that the most visible differences show up in careful color work or in test patterns, not in typical games.
Does Color Depth Matter for Gaming
For SDR games, the content is built for 8-bit output, so extra bits do little. Banding, the visible stair-step stripes in a sky or fog gradient, can still appear if the game or monitor processes the image poorly, but 10-bit hardware does not fix a game that renders in 8-bit.
For HDR games, the benefit is larger. HDR spreads a bigger brightness range across the same number of steps, so with only 8 bits the steps are further apart and banding is more likely. That is why HDR signals are commonly delivered in 10 bits.
Where Color Depth Actually Gets Limited
Having a 10-bit monitor does not guarantee you are seeing 10-bit. The chain is: game or app, graphics driver, cable and port bandwidth, then monitor. A break anywhere drops you to 8-bit.
- Cable and port bandwidth. High resolution and high refresh together can exceed what an older HDMI or DisplayPort version carries at full color depth. The graphics driver may then quietly pick 8-bit or reduce chroma. The monitor manual lists the supported combinations.
- Driver output setting. Graphics control panels usually let you choose the output color depth. If it is set to 8-bit, a 10-bit monitor runs at 8-bit.
- Windows HDR. Turning on HDR in the operating system generally triggers a 10-bit signal, but the exact behaviour depends on your driver and monitor.
- The game itself. Many games output 8-bit SDR regardless of the monitor.
How to Check and Set Color Depth
- Open your graphics driver control panel (NVIDIA Control Panel, AMD Software or Intel graphics settings).
- Find the display or resolution section and look for the output color depth option; menu names vary by driver version.
- Choose the highest depth that works at your resolution and refresh rate. If the screen blanks or flickers, drop to 8-bit or lower the refresh rate.
- In Windows display settings, the advanced display page shows the current bit depth for the active mode.
- If the settings page offers only 8-bit at your desired refresh rate, the cable, port or monitor input version may be the limit; consult the monitor’s manual for the recommended input.
Decision Table: Is 10-bit Worth It for You
| Pick this if … | Choice |
|---|---|
| You play fast competitive games in SDR | 8-bit is plenty; spend budget on refresh rate and response time |
| You play HDR games or watch HDR video | 8-bit+FRC or true 10-bit with a real HDR tier |
| You edit photos or video on the same monitor | 10-bit (native or FRC) along with a wide, well-reviewed gamut |
| You mostly game on a budget monitor | 8-bit; do not pay extra just for a 10-bit label without a good panel |
| You see banding in skies and fog | Check game settings and driver output depth before replacing the monitor |
Common Mistakes
- Assuming 10-bit equals more colorful. It gives smoother gradients, not stronger saturation.
- Ignoring FRC. An 8-bit+FRC monitor is not fake; it is a common, accepted approach, but it is not the same as native 10-bit.
- Setting an unsupported mode. Forcing 10-bit at the maximum refresh rate on a cable that cannot carry it leads to blank screens or sparkles.
- Blaming the monitor for banding in the game. If the game renders in 8-bit, banding can be baked in.
- Mixing up bit depth with the number of colors in sRGB. Those describe different things: precision versus range.
Frequently Asked Questions
Is 8-bit or 10-bit better for gaming?
10-bit has more tonal steps, but SDR games are built for 8-bit, so the gain is small. HDR games benefit more, because the wider brightness range is easier to display without banding on 10-bit.
What is 8-bit plus FRC?
It is an 8-bit panel that alternates between two close shades quickly so the eye sees an intermediate shade, simulating 10-bit. The VESA DisplayHDR criteria accept 8-bit plus 2-bit dithering as the minimum driver depth.
How many colors can a 10-bit monitor display?
Ten bits per channel gives 1,024 steps for each of red, green and blue, which multiplies to about 1.07 billion combinations. An 8-bit panel gives roughly 16.7 million.
Why does my monitor show only 8-bit in Windows?
Possible reasons are an output depth set to 8-bit in the graphics driver, a cable or port that cannot carry 10-bit at your resolution and refresh rate, or a monitor that is 8-bit native. Lowering the refresh rate often unlocks 10-bit if bandwidth is the limit.
Does color depth affect input lag or FPS?
The color depth setting itself is not generally reported as a significant factor in frame rate. The practical trade-off is bandwidth: a higher depth uses more link capacity, which can limit the top refresh rate on some connections.
Will 10-bit fix color banding?
It can reduce banding when the content and signal chain are also 10-bit. If the source is 8-bit or heavily compressed, banding may remain regardless of the monitor.
FAQ
Is 8-bit or 10-bit better for gaming?
What is 8-bit plus FRC?
How many colors can a 10-bit monitor display?
Why does my monitor show only 8-bit in Windows?
Does color depth affect input lag or FPS?
Will 10-bit fix color banding?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.