Our Top Picks
A Windows boot loop usually means the system can start but cannot finish loading, so it keeps restarting or dropping into Automatic Repair. The quickest route out is to reach the Windows Recovery Environment, then try Startup Repair, uninstall the latest update, use System Restore or boot into Safe Mode to remove whatever changed.
What a Boot Loop Looks Like
There are a few distinct patterns, and telling them apart saves time.

Skil-Care Heel-Check Boot, Inspection Window, Universal Fit, Heel Protector | 503410, Hook and Loop Fastening, Hand Washable, Reusable Padded Construction, Prevents Abrasion, Home or Clinical Settings
Chosen because it specifies Inspection Window and Universal Fit.
View on Amazon
3-Piece Portable Boots Storage Bag Set with Clear Window | waterproof pvc shell, dust and damp shield, handheld carry loop, quick shoe finder, closet space saver
Chosen because it specifies waterproof pvc shell and dust and damp shield.
View on Amazon| What you see | Likely cause | Where to start |
|---|---|---|
| “Preparing Automatic Repair” then restarts again | Corrupt boot files, failed update, bad driver | Advanced options in recovery |
| Logo appears, spins, restarts before sign-in | Driver or update failure during startup | Safe Mode, uninstall latest update |
| Restarts before any logo | Hardware, power, RAM or firmware issue | Strip back hardware, reset firmware settings |
| Blue screen then restart | Driver or hardware fault, with a stop code | Note the code, disable auto-restart |
| Loop after Windows Update | Update not completing or conflicting driver | Uninstall updates in recovery |
| Loop after hardware change | Mismatched RAM, loose cable, wrong boot drive | Undo the change, reseat parts |
Step 1: Rule Out the Simple Things
- Disconnect external USB drives, printers, capture cards and extra monitors. A device that confuses startup can cause a loop, and Microsoft’s own update guidance lists removing external hardware as a standard step.
- If you have just added hardware, such as RAM or a drive, undo the change to see if the loop stops.
- Make sure the boot order in firmware still points to your Windows drive. Menu names vary by motherboard maker, so check the manual.
Step 2: Reach the Windows Recovery Environment
Windows normally enters recovery by itself after repeated failed boots. If it does not, a common method is to power the PC off with the power button during startup a few times, which prompts Windows to launch recovery on the next start. You can also boot from a Windows installation USB made on another computer and choose Repair your computer instead of Install. Microsoft’s support page on advanced startup options describes reaching Troubleshoot, then Advanced options, and from there Startup Settings, which includes Safe Mode.
If your drive is encrypted with BitLocker, the system may ask for the recovery key. Microsoft’s documentation stresses having it available. It is stored in your Microsoft account or wherever you saved it when encryption was enabled, so locate it before changing settings.
Step 3: Recovery Tools in Order of Safety
| Tool | What it does | Risk to files |
|---|---|---|
| Startup Repair | Automated check of boot files and common startup faults | Low |
| Uninstall latest quality or feature update | Removes the most recent update | Low |
| System Restore | Returns system files and settings to a restore point, if one exists | Low, apps installed afterwards are removed |
| Safe Mode | Loads minimal drivers so you can remove problem software | Low |
| Command Prompt tools | Manual repairs for advanced users | Medium, mistakes are possible |
| Reset this PC (keep files) | Reinstalls Windows, keeps personal files | Medium, apps removed |
| Clean install | Wipes and reinstalls | High, back up first |
Step 4: Safe Mode
From recovery, go to Troubleshoot, Advanced options, Startup Settings and Restart. Microsoft lists Safe Mode as option 4, Safe Mode with Networking as option 5 and Safe Mode with Command Prompt as option 6. Safe Mode starts Windows with a limited set of files and drivers. If the loop stops there, the cause is almost certainly a driver or program loading in normal mode. From Safe Mode you can uninstall the latest driver, remove recently installed software or run system file repair.
Step 5: Repair System Files
If you can reach a Command Prompt, either in Safe Mode or in recovery, the standard Windows tools are the System File Checker and DISM. Their commands and options are documented by Microsoft, and the run order commonly given is DISM first for the component store, then SFC. Run them from an elevated prompt and let them finish; they can take a while. Inside the recovery environment, drive letters may differ from what you see in Windows, so confirm the correct Windows drive before running offline scans.
Step 6: Hardware Causes
If Windows never reaches the logo, or the PC restarts at random points, suspect hardware.
- RAM: reseat the modules and try one at a time. Memory profiles such as XMP or EXPO can cause instability; resetting firmware to defaults is a common test. BIOS changes can cause instability and may affect your warranty, so change a single option at a time.
- Storage: a failing drive can cause repeated repair loops. Run the maker’s drive diagnostics from another computer or a bootable tool.
- Power supply: an unstable PSU can cause restarts under load. Never open a PSU; if you suspect one, have it tested or swap in a known good unit.
- Overclocks: undo any CPU, GPU or memory overclock and return to defaults.
Before touching anything inside the case, shut down, switch off the supply and unplug the power cable.
Common Mistakes
- Doing a full reset before trying Startup Repair, uninstalling updates or Safe Mode.
- Skipping a backup. If you can reach the Command Prompt in recovery, you can sometimes copy files to an external drive before major repairs.
- Forgetting the BitLocker key and getting locked out.
- Running random registry or “fixer” tools downloaded from unknown sites.
- Assuming the drive is dead without checking boot order and cables.
- Ignoring a stop code. If you see a blue screen, the code and any named file point to the cause.
When to Reinstall or Call Support
If Safe Mode, Startup Repair and System Restore all fail, and drive diagnostics are clean, a repair install or clean install is the logical next step. If hardware tests fail, contact the maker of the part or a qualified technician. For a prebuilt PC or laptop under warranty, use the maker’s support route before disassembling anything.
Frequently Asked Questions
Will a boot loop delete my files?
The loop itself does not delete files, and most recovery tools leave personal data in place. Options such as a full reset or clean install carry more risk, so back up first where possible. Choose the keep-my-files variant of a reset if you must reset.
How do I get into recovery if Windows will not start?
Windows usually opens it automatically after several failed boots. Otherwise boot from a Windows installation USB made on another PC and pick the repair option. Some makers also provide a dedicated recovery key at startup, listed in the device manual.
Can a Windows update cause a boot loop?
Yes, an update that fails to complete, or a driver included with it, can cause one. In recovery, the Uninstall Updates option under Advanced options removes the latest quality or feature update. After that, pause updates briefly and check the maker’s driver pages.
Is a boot loop a sign of a dead hard drive or SSD?
Sometimes, but not always. Corrupt system files, bad drivers and firmware settings are common causes too. Run the drive maker’s diagnostic before deciding.
What if the PC restarts before the Windows logo?
That points toward firmware or hardware rather than Windows. Remove added parts, reseat memory, reset firmware defaults and check power connections. If it persists, contact the motherboard maker or a technician.
FAQ
Will a boot loop delete my files?
How do I get into recovery if Windows will not start?
Can a Windows update cause a boot loop?
Is a boot loop a sign of a dead hard drive or SSD?
What if the PC restarts before the Windows logo?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.