Key takeaways
- Confirm the monitor is running at its top refresh rate in Windows.
- Make sure the cable and port support that rate.
- Update the graphics driver, since tearing bugs are sometimes fixed in newer driver releases.
- Close overlays or capture software that can interfere with presentation, and test again.
- If tearing is present in the desktop or a video player, rather than just in games, check the browser’s or player’s hardware acceleration settings.
Without variable refresh rate, the main way to stop screen tearing is to turn on V-Sync, ideally with a frame cap just below your monitor’s refresh rate to limit the added input lag. If you want to stay away from V-Sync, a frame limiter and a higher refresh rate reduce tearing but rarely remove it.
Why Tearing Happens
Screen tearing is a visual artifact where the display shows parts of more than one frame in a single screen draw. It occurs when the frames from the GPU are not synchronized with the monitor’s refresh cycle. If the GPU hands over a new frame while the monitor is partway through drawing the previous one, you see a horizontal split line, most visible during fast side-to-side motion.
Variable refresh rate (FreeSync and G-Sync) fixes this by making the display follow the GPU’s output. Without it, the monitor refreshes on a fixed schedule, so the fix has to come from software or from how many frames you send.
Quick Comparison of Fixes Without VRR
| Method | What it does | Pros | Trade-offs |
|---|---|---|---|
| V-Sync (on) | Holds frames until the monitor is ready to refresh | Removes tearing | Adds input lag; can cause stutter below the refresh rate |
| Adaptive V-Sync | Applies V-Sync only above the refresh rate | Less stutter at low frame rates | Tearing can return below the refresh rate |
| Frame cap at refresh rate | Limits frames sent to the display | Lower heat and lag than uncapped | Does not fully remove tearing alone |
| Higher refresh monitor | Refreshes more often | Tear lines are shorter-lived and less visible | Does not eliminate tearing |
| Borderless windowed mode | Uses the desktop compositor | Often tear-free on Windows | Can add some latency; behavior varies by game |
| Driver-level fast sync options | Presents the latest completed frame at refresh | Lower lag than V-Sync when fps is far above refresh | Needs frame rates well over the refresh rate; not available everywhere |
Option 1: Turn On V-Sync
V-Sync prevents the graphics card from updating display memory until the monitor finishes its refresh. Wikipedia’s description notes that it can add input lag in games, which is the main reason competitive players avoid it.
- Open the game’s video settings and enable V-Sync, or
- Open the graphics driver control panel (NVIDIA Control Panel, AMD Software, or Intel Graphics settings) and set V-Sync to on for that game or globally. Menu names vary by driver version.
- Restart the game if it does not take effect.
When the GPU cannot reach the monitor’s refresh rate, classic V-Sync can drop the frame rate to a fraction of it, such as half, which feels like stutter. That is why a high-refresh monitor with V-Sync works better, since the steps between possible rates are smaller.
Option 2: Use Adaptive V-Sync or Fast Sync Modes
Adaptive versions, offered by NVIDIA and AMD, apply V-Sync only when frame rate exceeds the refresh rate. That cuts stutter when frame rates dip, but tearing can reappear at those dips. Some drivers also offer a mode that presents the newest finished frame at each refresh, which lowers lag but typically needs frame rates far above the monitor’s rate to work well. Options and names differ between graphics makers, so consult the driver’s documentation.
Option 3: Cap Your Frame Rate
An in-game or driver-based frame limiter, set a few frames below the refresh rate, can reduce the amount of tearing and keep latency low when V-Sync is on. Reviewers who cover latency often pair V-Sync with a cap slightly under the refresh rate to avoid the buffer filling up. The exact figure that works depends on the game and your hardware, so adjust gradually.
Option 4: Try Borderless Windowed Mode
On Windows, the desktop compositor generally keeps windowed and borderless windowed output synchronized, which can eliminate tearing without enabling V-Sync inside the game. Behavior differs by game, graphics API and Windows version, and it may add a small amount of delay. Test it in the game you care about.
Option 5: Raise the Refresh Rate
If you are still on 60 Hz after buying a faster monitor, the display may not be using its full rate. In Windows display settings, open advanced display and select the highest supported refresh rate. A higher rate does not remove tearing in itself, but the tear lines appear for less time, and V-Sync becomes less harmful to responsiveness.
Decision Table: Pick X If…
| Pick this | If you… |
|---|---|
| V-Sync on with a frame cap | play single-player or casual games and want a clean image |
| Adaptive V-Sync | have frame rates that often dip below the refresh rate |
| V-Sync off with a frame cap | prioritize the lowest input lag in competitive titles and can accept some tearing |
| Borderless windowed | want a quick tear-free option and do not mind a tiny delay |
| Upgrade to a VRR monitor | want a lasting fix without V-Sync’s lag |
Check Your Hardware Before Changing Settings
- Confirm the monitor is running at its top refresh rate in Windows.
- Make sure the cable and port support that rate.
- Update the graphics driver, since tearing bugs are sometimes fixed in newer driver releases.
- Close overlays or capture software that can interfere with presentation, and test again.
- If tearing is present in the desktop or a video player, rather than just in games, check the browser’s or player’s hardware acceleration settings.
Consoles and TVs
Consoles connected to TVs without VRR rely on the game or system to apply V-Sync, which is why most console titles look tear-free but may carry slightly more delay. If your TV has a game mode, turn it on to reduce its own processing. If it supports VRR over HDMI, enabling it in both the TV and the console settings can remove the trade-off, according to the respective makers.
Common Mistakes
- Enabling V-Sync in both the game and the driver, which can produce unpredictable results. Use one location.
- Capping the frame rate above the monitor refresh rate, which still lets tearing through.
- Assuming tearing is a faulty GPU. It is almost always a synchronization matter.
- Judging the setting by a menu scene instead of fast motion in gameplay.
- Leaving a TV in a different picture mode that adds its own processing and lag. Use game mode on TVs.
When a VRR Monitor Is the Better Answer
If tearing and lag both bother you, VRR addresses both at once. FreeSync and G-Sync adapt the display’s refresh rate to the frame rate the GPU produces, which is why they are widely seen as the long-term answer. Check the monitor maker’s specification for the supported range and for compatibility with your graphics card.
Frequently Asked Questions
Does V-Sync cause input lag?
It can. By holding frames until the next refresh, V-Sync adds delay in many games, which is why esports players often leave it off. Capping the frame rate just under the refresh rate usually reduces the effect.
Can I stop tearing without V-Sync?
You can reduce it with a frame cap, a higher refresh rate and borderless windowed mode, but fully removing it without V-Sync or VRR is not reliable. The remaining tear lines appear mostly in fast motion.
Why do I still see tearing with V-Sync enabled?
Common causes include the setting being overridden by the driver, running in an exclusive mode that ignores it, or a game-specific bug. Try enabling it in one place only, update the driver and test in borderless windowed mode.
Is tearing worse at lower frame rates?
It is often more noticeable when frame rates fluctuate close to the refresh rate, since the split line wanders on screen. Very high frame rates produce more frequent but smaller tears.
Will a higher refresh rate monitor fix tearing?
It makes tearing less obvious but does not remove it. Pairing a higher refresh rate with V-Sync or VRR gives the cleaner result.
FAQ
Does V-Sync cause input lag?
Can I stop tearing without V-Sync?
Why do I still see tearing with V-Sync enabled?
Is tearing worse at lower frame rates?
Will a higher refresh rate monitor fix tearing?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.